Easytherm 1
The smallest Easytherm induction heater is the right choice for heating the smallest bearings (min. ID ø 10 mm, max. weight 10 kg). Small bearings are often mounted with tools based on impact, while small bearings are very sensitive to axial forces. With the Easytherm 1 induction heater, correct mounting of the smallest bearings is possible without damage.
The following yokes are included with Easytherm 1:
10 x 10, 20 x 20, 30 x 26. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 500 mm is included as well.
The following yokes are included with Easytherm 1:
10 x 10, 20 x 20, 30 x 26. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 500 mm is included as well.
- Yokes: 10 x 10, 20 x 20, 30 x 26
- Temp. Sensor: 500 mm
Easytherm 2
Easytherm 2 is a compact induction heater that, like the smaller ET1, can heat bearings with a minimum ID ø 10mm. The range of the Easytherm 2 is much larger however, it can heat up bearings with a max. mass of 40 kg and max. OD ø 290mm. Even with this wide range of possibilities our Easytherm 2 is very portable, due to its low weight. In the sturdy carrying case (optional), this induction heater is the ideal mobile service tool. The Easytherm 2 is a more efficient and versatile alternative to other portable solutions in the market. Very popular as a standard tool on ships.
The following yokes are included with Easytherm 2:
14 x 14, 25 x 24, 40 x 38. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 500 mm is included as well.
The following yokes are included with Easytherm 2:
14 x 14, 25 x 24, 40 x 38. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 500 mm is included as well.
Easytherm 3.5
Easytherm 3.5 is the ideal induction heater for intensive use in service/repair and production environments. The pivoting yokes make the process of heating bearings safe and efficient. Intended to be used stationary, with a very wide application range of small to medium-sized bearings (min. ID ø 10mm – max. OD ø370mm). In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).
The following yokes are included with Easytherm 3.5:
14 x 14, 25 x 24, 50 x 48. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.
The following yokes are included with Easytherm 3.5:
14 x 14, 25 x 24, 50 x 48. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.
Easytherm 15
For heating larger and heavier bearings with a max. mass of 150 kg and max. OD ø 490mm, the Easytherm 15 is a powerful and reliable tool. The ET15 is made for very intensive use in industrial production or service/repair environments. In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).
The following yokes are included with Easytherm 15:
40 x 38, 70 x 70. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.
The following yokes are included with Easytherm 15:
40 x 38, 70 x 70. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.
Easytherm 30
Easytherm 30 is the largest Easytherm induction heater. Suitable for heating bearings with max. mass of 300 kg and max. OD ø 660mm. Our standard version is a workbench model. The ET30 is designed for very intensive use in industrial production or service/repair environments. In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).
The following yokes are included with Easytherm 30:
80 x 80. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.
The ET30 can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace. The trolley is designed to store the different yokes.
The following yokes are included with Easytherm 30:
80 x 80. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.
The ET30 can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace. The trolley is designed to store the different yokes.