The SURETHERM 10X may be small, but proves to be a powerful induction heater showing great flexibility. Featuring an extendable work area, it is suitable for small-sized components (up to 50 kg) with a maximum diameter of 450 mm when used with extension yokes. Easy to use and highly portable, especially when used in combination with the optional carrying case. The ideal heating tool to use on location.

The following yokes are included with SURETHERM 10X:
10 x 10, 14 x 14, 25 x 24, 40 x 38. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 500 mm are included as well.

• Portable (case optional)
• Yoke 10 / 14 / 25 / 40 included
• 110 - 230 Vac
• Max. Weight 50 kg / 100 lbs

The SURETHERM 20X is a stationary induction heater with ergonomic pivoting yokes, making it a versatile addition to the SURETHERM-series. The pivoting yoke makes for easy workpiece handling as there is no need to lift the part and remove the yoke. To be used for professional mounting of a wide range of parts, including bearings (max. weight: 100 kg, max. diameter: 500 mm). When extension yokes are used, the maximum diameter is 680 mm.

The following yokes are included with SURETHERM 20X:
50 x 48. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 500 mm are included as well.

• Adaptable all-rounder
• Ergonomic pivoting yokes
• 110 - 230 Vac
• Max. Weight (Workpiece) 100 kg / 220 lbs

Equipped with our intuitive touchscreen interface, ergonomic pivoting yokes, and two sensor heating, the SURETHERM 30X is the most complete heater we’ve ever built. Designed for use in maintenance shops and production areas, this heating tool can heat parts with a maximum weight of 200 kg, and a diameter of up to 600 mm (840 mm when used with extension yokes).

The following yokes are included with SURETHERM 30X:
70 x 70. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 500 mm are included as well.

• Accurate heavyweight
• 400 - 575 Vac
• Max. Weight (Workpiece) 200 kg / 440 lbs

The following yokes are included with SURETHERM PRO 1X: 80 x 80. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 1000 mm are included as well.

The SURETHERM PRO 1X can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace.

• 400 - 575 Vac
• Max. Weight (Workpiece) 400 kg / 880 lbs

The following yokes are included with SURETHERM PRO 1X-P: 80 x 80. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 1000 mm are included as well.

The SURETHERM PRO 1X-P can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace.

• 400 - 575 Vac
• Max. Weight (Workpiece) 400 kg / 880 lbs

The following yokes are included with SURETHERM PRO 3X: 100 x 100. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 1000 mm are included as well.

• 400 - 575 Vac
• Max. Weight (Workpiece) 800 kg / 1764 lbs

The following yokes are included with SURETHERM PRO 6X: 150 x 150. Additional yoke sizes are listed in our Datasheet. Two magnetic temperature sensors with a length of 1500 mm are included as well.

• 400 - 575 Vac
• Max. Weight (Workpiece) 1600 kg / 3527 lbs

Only available as a complete induction application, including custom-built inductor. Get in touch to discuss your specific heating task.

Only available as a complete induction application, including custom-built inductor. Get in touch to discuss your specific heating task.

The smallest Easytherm induction heater is the right choice for heating the smallest bearings (min. ID ø 10 mm, max. weight 10 kg). Small bearings are often mounted with tools based on impact, while small bearings are very sensitive to axial forces. With the Easytherm 1 induction heater, correct mounting of the smallest bearings is possible without damage.

The following yokes are included with Easytherm 1:
10 x 10, 20 x 20, 30 x 26. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 500 mm is included as well.

• Yokes: 10 x 10, 20 x 20, 30 x 26
• Temp. Sensor: 500 mm

Easytherm 2 is a compact induction heater that, like the smaller ET1, can heat bearings with a minimum ID ø 10mm. The range of the Easytherm 2 is much larger however, it can heat up bearings with a max. mass of 40 kg and max. OD ø 290mm. Even with this wide range of possibilities our Easytherm 2 is very portable, due to its low weight. In the sturdy carrying case (optional), this induction heater is the ideal mobile service tool. The Easytherm 2 is a more efficient and versatile alternative to other portable solutions in the market. Very popular as a standard tool on ships.

The following yokes are included with Easytherm 2:
14 x 14, 25 x 24, 40 x 38. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 500 mm is included as well.

Easytherm 3.5 is the ideal induction heater for intensive use in service/repair and production environments. The pivoting yokes make the process of heating bearings safe and efficient. Intended to be used stationary, with a very wide application range of small to medium-sized bearings (min. ID ø 10mm – max. OD ø370mm). In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).

The following yokes are included with Easytherm 3.5:
14 x 14, 25 x 24, 50 x 48. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.

For heating larger and heavier bearings with a max. mass of 150 kg and max. OD ø 490mm, the Easytherm 15 is a powerful and reliable tool. The ET15 is made for very intensive use in industrial production or service/repair environments. In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).

The following yokes are included with Easytherm 15:
40 x 38, 70 x 70. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.

Easytherm 30 is the largest Easytherm induction heater. Suitable for heating bearings with max. mass of 300 kg and max. OD ø 660mm. Our standard version is a workbench model. The ET30 is designed for very intensive use in industrial production or service/repair environments. In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).

The following yokes are included with Easytherm 30:
80 x 80. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.

The ET30 can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace. The trolley is designed to store the different yokes.