Sensor «2×2» is designed to work on surfaces with a small distance between cracks.
This sensor has 4 electrodes, which are arranged in two rows.
Crack depth meter ET-28 – high-precision instrument for measuring the depth of cracks exposed on various metals and alloys (incl. stainless steel, duraluminum), previously detected by other methods.
The operating principle of the Crack Depth Meter – AC electro potential measuring that provides prompt and precise depth test (in comparison to traditional methods).
ATTENTION! If you buy only Sensor «2×2», the Crack depth meter ET-28 should be sent to the retrofit and alignment.
Before each use of the device for measuring the depth of cracks on the product, it is necessary to check its operation on a control sample.
ATTENTION! If you buy only Sensor «2×2», the Crack depth meter ET-28 should be sent to the retrofit and alignment.
Sensor «2×2» is designed to measure the depth of cracks from 0.5 to 20 mm.
This sensor has 4 electrodes, which are arranged in two rows.
ATTENTION! If you buy only Sensor «2×2», the Crack depth meter ET-28 should be sent to the retrofit and alignment.
Sensor «2×2» (2 electrodes in two rows) — 1 piece
ATTENTION! If you buy only Sensor «2×2», the Crack depth meter ET-28 should be sent to the retrofit and alignment.