- Description
- Exploitation
- Technical specifications
- Delivery set
Probe A (HV5) included in the standard delivery of UCI hardness tester TQ-4C.
The design of hardness testers TQ-4C provides full interchangeability of probes!
Probe A (HV5) is purposed for hardness measurement of following:
- Carbonaceous and structural steels;
- Items with surface-hardened layers such as cementation, nitride hardening, high frequency current hardening;
- Heat-proof, corrosion-proof, non-corrosive steels;
- Plated coating (chrome), overlaying;
- Items of complicated configuration.
Advantages
- Stable readings independent from force and time of pressing.
- Easy measuring in hard-to-reach areas.
- Ultra-small control area (from 1 mm).
- Control in slots and blind holes from 5 mm (not provided by rival devices).
- Invisible print on mirror-surface.
- Low sensitivity to the curvative of surface, thickness and weight of product.
Probes characteristics
| Photo | Probe Type/Load | Weight/thickness/ surface roughness of the article under check |
Length/ |
Application |
 |
«А» 50H/5 kg |
1 kg/3 mm/Ra 1,6 | 145/26 mm | Solving of main hardness testing tasks |
| «H» 10H/1 kg |
1 kg/2 mm/Ra 0,8 | 145/26 mm | Hardness testing of electroplated coating (chrome, copper, nickel, zinc, tin), thinwalled and small-sized items | |
| «С» 100H/10 kg |
1 kg/4 mm/Ra 3,2 | 145/26 mm | Hardness testing of items with unprepared surface, large items and heavy-duty equipment | |
 |
«К» 50H/5 kg |
1 kg/3 mm/Ra 1,6 | 76/33 mm | Hardness testing of inner surface of tubes, tanks and other hard-to-reach areas |
 |
«AL» 50H/5 kg |
1 kg/3 mm/Ra 1,6 | 194/26 mm | Hardness testing in hard-to-reach areas as pinholes, grooves, in-between gear teeth zones (length of tip 65 mm) |
ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.
Probe A (HV5) is designed to solve the bulk of the problems of hardness control of metals and alloys.
Requirements to controlled item:
- Items heavier than 1 kg and thicker than 3 mm need no additional preparation;
- Items lighter than 1 kg should be fixed in a vice clamp or on a support plate by fixing paste;
- Items with a thickness of less than 3 mm should be fixed in a vice clamp or on a support plate by fi xing paste;
- Roughness of controlled surface providing best measurement accuracy is 1.6 RA.
ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.
| Photo | Probe Type/Load | Length/Diameter | Weight | Application |
 |
«A» 50 H (5 kg) |
145 / 26 mm | 0,3 kg | Solving of main hardness testing tasks |
ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.
Probe A (HV5) — 1 piece
ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.
ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.